Professional Manufacturer of Package and Printing Machine    E-mail: [email protected]

Product Search

Die Cutting Spring Electric Grinder Nick Angle Portable Nick Grinder Tools By Hand Die-making Nick Grinder Nick Grinding Machine

Products

Die Cutting Spring Electric Grinder Nick Angle Portable Nick Grinder Tools By Hand Die-making Nick Grinder Nick Grinding Machine

Type:Box cutting

Weight:0.8KG

Revolution:35000 R/ Min

Working pressure:0.6~0.8Mpa

Motor:Grinding wheel type:0.3-0.5-0.7-0.8-1.0-1.2-2.0

  • Details

Die Cutting Spring Electric Grinder Nick Angle Portable Nick Grinder Tools By Hand Die-making Nick Grinder Nick Grinding Machine


Model

HS-N73

Average Air Consumption

4CFM

Driven Type

Pneumatic

Maximum Torque

Adjustable

No-Load Speed

15000RPM

Color

Golden

Gross weight

1.6kg

Dimension

28*14*15CM


Instruction for operation

1) When installing the grinding wheel, put it between two brass-sleeves on the transmission-shaft, then use spanner to fix the transmission-shaft and screw the nut.

2) Different depth of nicks can be obtained by adjusting the control screw: Turning the screw clockwise will reduce the depth of nick, contrary, the depth will increase.

3) The depth of nick should be determined by cutting dies, otherwise, will cause abnormal wear on the grinding wheel.

4) The switch on the tail of the device can control the speed of motor, and it can control the mother start or stop as well.

5) When grinding nicks, use locating-device to position the machine on the top of cutting rules, then press the grinding wheel towards the blade of cutting rules stably and quickly.

 

Introduction Of Manual Die Cutting Nick Grinder

1. This machine is dedicated to the die-cutting department of the printing industry. It is used to punch various types of die-cutting and creasing knives and steel wires with different depths and widths. It is not applicable to other categories.

2. This machine is a pneumatic tool. It needs an air pump that can meet the working pressure. After the air pump is inflated, the rotary switch will operate normally.

3. Installed on a suitable workbench in the knife mold room.

4. Common sense of opening the connection point:

1) Opening the connection point is an indispensable process in the indentation die-cutting mold.

2) Opening the connection point is to open a small opening of a certain width/depth at the edge of the die cutting knife. During the die cutting process of the carton, the carton and the waste edge of this part are still partially connected after die cutting to keep the whole intact Performance, so that the next process is more unified and smooth.

 

Product Show

Ensure accurate, consistent, perpendicular nicks with this diemaking tool. The design of the Nick Grinder guarantees that nicks will be properly placed and prevent premature break up of the sheet. Adjustable depth stop, easy-to-read scale on base and safety guard make this grinder a professional tool.

 

Order process



Previous Product:Cutting Machine Pneumatic Nick Grinder Groove Grinding Machine for Carton Flatbed Diecutter For Making Nick On Packaging Die-cut Board

Next Product:Pneumatic Nick Grinder Hand Operation Die Cutting Air Nick Grinder Grinding Machine for Flat Die Cut Grinding Nicks In Cutting Dies

Post your feedback

The Code:

Wechat Code
Wechat
Whatsapp Code
Wechat