Handle Knife Die Machine Portable Mini Pneumatic Angle Nick Grinder Easy Operation Die cutting Tool

Model Number	HS-N76
Average Air Consumption	4CFM
Driven Type	Pneumatic
Maximum Torque	Adjustable
No-Load Speed	15000RPM
Color	Blue
Weight	1.6kg
Dimension	28*14*15CM

Field of Application

The Nick Grinder Steel rule nick-grinder is designed to the sole purpose of grinding “nicks” of various widths and depths in

the cutting rule of steel rule dies used for the die cutting and creasing of paper, cardboard and corrugated

board.

THE MACHINE MUST NOT BE USED FOR ANY OTHER PURPOSES.

Work Station

The nick-grinder is installed and operated:

In the die-room at a suitable working table, or at the die-cutting machine with the die pulled out and supported by the two carrier arms of the die cutter.

For Maximum Safety

1, Keep work area clean and tidy.

2, Use appropriate lighting in work areas

3, When not in use, store the nick-grinder in a safe place to avoid unintentional starting.

IF STORED A WAY IN A DRAWER, DISCONNECT THE UNIT FROM THE AIR SUPPLY LINC.

Instructions for Assembly

The nick-grinder consists of the following main components:

1, Grinding head assembly (grinding head and base-plate - (upper part).

2, Air-motor.

3, Air-hose -3m with on/off-valve.

The unit is delivered with the grinding head assembly and Air-motor completely assembled.

Connecting the threaded part of the on/off-valve to the air-motor at the unmarked air inlet hole.

Fix the on/off-valve firmly to the air-motor by tightening nut.

Turn the swiveling valve-housing to a vertical position with the knob facing upwards.

Picture of HS-N76 Air Nick Grinder

Oder Steps