Precautions for the use of pneumatic waste removal machine:

Safety of equipment

１．When the worker using .barometric pressure do not over 0.8mpa.pressure exceptional exchange and damage the equipment .

２．Be sure to protect the windpipe . The windpipe is prohibited near heat source and greasy dirt.

３．The worker must check up all parts before making .Include windpipe pipeline and link the point and compressor of air .

1. Waterproof:

Please install the "oil-water separator" according to the manufacturer's requirements. pay attention to the drainage in the oil-water separator and add pneumatic tool oil in it. more details, please see below picture.

2. Cleaning:

①, the internal cleaning of the machine: pour "kerosene or anti-rust oil or pneumatic tool oil" into the air inlet every day, then turn on the stripper and let it run idly, it clean the internal parts automatic when it is idling. please note, add the pneumatic tool oil is for maintain, kerosene and anti-rust oil is for cleaning.

②, External cleaning: After get off work every day, please use an air gun to blow out the paper scraps in the machine shell, chain gaps and other places.

3. Air pressure requirements:

Above 6-8 air pressure, the actual power of the air compressor is above 3.5KW, and the air compressor needs to be drained regularly.

4. The process of removing waste should be done by pressing down with both hands gently to the end. Do not use the stripper to beat the waste paper to remove waste.

5. Safety precautions:

①, Operator's safety: Please operate the waste stripper with both hands, not one-handed, to prevent the chain from hurting people.

②, the safety of the waste stripper: do not let stripper to touch wooden bottom plate or the hard iron objects when it is working, otherwise the chain will be broken.

6. Try not to let the machine work continuously, let it rest for one minute after using 1 hour.

Any questions, please feel free to contact us directly as below:

Email: [email protected]
WhatsApp: +86 18475613114