Die-making Portable Pneumatic Manual Mini Pneumatic Nick Grinder Hand Power Air Nick Grinding Machine

Nick grinders are pneumatic driven and have been designed for easy and precise nicking of steel rules operations.

 

Average Air Consumption	4CFM
Maximum Torque	Adjustable
No-Load Speed	35000RPM
Color	Yellow/Blue/Green
Automatic Grade	Semi-Automatic
Packing	1set/box
Net Weight	0.8kg
Usage	Die cutting Nick Grinding
Dimension	28*14*15CM
Payment Terms	T/T, Western Union , Paypal
Inlet pipe diameter	8*5mm
Working pressure Mpa	0.6-0.8
Air pipe length	1.2+6M
Delivery tools	4pcs
Free grinding wheel per set	10pcs
Warranty service	6 months

 

Nick Grinder is a useful tool for nicking steel rule in a secure way. Makes clean, burr free nicks.

 

Chaoyi machine includes machines, equipment as well as materials for diemaking. For the insertion of transport nicks in cutting rules, Chaoyi has a special grinding device in its range of services, which is convincing with its grinding quality, good equipment and flexibility in use.

 

Nicks are of great importance in packaging production. This is because the transport nicks determine the performance of the manufacturing process and the machine speed at which production can take place. At the same time, the nicks should impair the appearance of the packaging as little as possible. Therefore, the credo is: as few and as small nicks as possible.

 

Transport nicks are usually ground in by the diemaker during die production. However, regrinding is also often necessary on site at the packaging manufacturer. For this reason, there are specific mechanical nick grinders that are especially designed for this application.

 

Instruction for installation

1, Connect the air-hose to the central, compressed air line, or to a suitable compressor.

The air consumption at maximum load is 0.22 m3/min. at 6.3 bar air pressure.

2, To avoid unintentional starting of the air-motor when connecting the unit to the air supply line, make sure that the on/off-valve for the air-motor is shut off.

3, Air motor:

· The air-motor is designed to operate at an air pressure of 6-7 bar.

· The correct air size is: 5mm.

· Blow out the air-hose before connecting.

· During operation the air-motor should be lubricated with oil.

 

Pictures of HS-N75



Oder Steps